COMPONENTS
AC Source
Thyristor
Gate Pulse
Diode
Resistor
Ammeter
Voltmeter
Ground
OBSERVATION TABLE
| S.No. | VLrms (V) |
ILrms (A) |
VLavg (V) |
ILavg (A) |
|---|---|---|---|---|
IL
17
18
VT1
5
6
9
7
8
T1
10
GP1
VT2
11
12
T2
15
13
14
16
GP2
VGP1
19
20
VGP2
22
23
VINP
1
2
3
4
AC
21
GND1
24
GND2
29
30
R
31
32
VLOAD
D2
25
26
D1
27
28
WAVEFORM
- STEP 1: Drag and drop the components in the workspace to create the circuit.
- Nos of required components:
- AC Source – 1, Thyristor – 2, Gate Pulse – 2, Diode - 2
- Resistor -1, Ammeter – 1, Voltmeter – 6, Ground - 2
- STEP 2: Make the connections as per the instructions given below:
- (a) (01-03, 03-08, 02-04, 08-25, 14-27)
- (b) (04-27, 05-07, 06-08, 07-17, 13-17)
- (c) (18-29, 09-10, 11-13, 12-14, 15-16)
- (d) (10-19, 20-21, 16-22, 23-24, 26-28)
- (e) (28-30, 29-31, 30-32)
- STEP 3: Click on the CHECK button to check the connections.
- Note: Right click on the component to open the dialog box to edit the properties of the component.
- STEP 4: Input the values for all the required components (AC Source, Gate Pulses and Resistor) and the waveform will get plot automatically.
- STEP 5: Now, Click on the ADD button to insert the reading into the observation table.
- STEP 6: Now, you can input different values as per your requirement to get the desired waveform.
- STEP 7: Repeat Step 5 to again insert the reading into the table and now repeat Steps 6 to 7 to take more readings.
- STEP 8: Click on the PRINT button to take out the print of the webpage.
- STEP 9: Click on the RESET button to reload the webpage.
